Dunwoody homeowners and property managers deal with the same electrical problems every city this size produces: panels that were sized for a different era, outlets that stopped working without warning, and wiring that has been added to over the years without a clear record of what went where. We handle all of it, from a single dead circuit to a full rewire, and we scope the job on the call before anything is scheduled. The price is confirmed before we start, and we are available every day from 6:30 AM to 9:00 PM.
When you call, you reach someone who knows the trade and can walk through the job with you on the phone. We take calls across Dunwoody and the surrounding DeKalb County area, and the process is the same regardless of the size of the job. Describe what you are seeing, and we will tell you what it likely involves and what it will cost before you commit to anything.
We answer when you call. We explain the work. We leave it safe.
Lighting is one of those things that only gets attention when something goes wrong, or when a renovation makes it obvious how dated the existing setup is. We handle both situations. A flickering fixture can point to a loose connection at the switch, a failing dimmer, or a wiring fault further back in the circuit. We trace it to the source rather than replacing parts until something works.
Recessed LED layouts, ceiling fan installation, fixture swaps, and dimmer upgrades are all regular requests. Where a ceiling box does not already exist, we add one properly rather than relying on whatever is already in the drywall. Dimmer switches require a compatible circuit and a compatible fixture, and we check both before the switch goes in. A ceiling fan that wobbles or hums after installation usually points to a wiring or mounting issue, and we address that at the same time.
Good electrical work isn't complicated, it's just done right, and exterior lighting is a clear example. Motion sensor lights, floodlights, and driveway lighting all need weatherproof wiring and a circuit that can handle outdoor conditions over time. We run the wiring properly, seal the connections for weather exposure, and test the sensors before the job closes. If other exterior work is already on the schedule, adding an outdoor outlet or a security light at the same time is worth the conversation.
Your time matters, so we keep the wiring job moving, whether that means running a new circuit for a workshop or tracing a fault through an older home that has been rewired in pieces over the years. The jobs below cover the situations we see most often.
A full rewire makes sense when the wiring throughout a home is knob-and-tube, when aluminum branch-circuit wiring has created connection problems across multiple circuits, or when a renovation has opened the walls and what is behind them does not meet current code. Partial rewiring is appropriate when the problem is limited to specific areas or circuits. We assess what is in place, explain what needs to change, and carry the work through to a code-compliant finish. Grounding and bonding are addressed throughout, not just at the panel.
A welder or air compressor draws more current than a standard circuit was built to carry. Running a dedicated circuit for workshop equipment means sizing the breaker and the wire gauge to match the actual load, not the nearest available slot in the panel. We do the load calculation first, confirm the panel has capacity to support it, and run the circuit to the right location in the garage or outbuilding. If the panel is already at capacity, we scope that alongside the circuit work.
Ground-fault and arc-fault protection requirements have expanded significantly over the years, and many older Dunwoody homes have neither where current code now calls for it. GFCI protection is required in kitchens, bathrooms, garages, and exterior outlets. AFCI protection is required on most bedroom and living area circuits in homes that have been updated or renovated. We identify what is missing, explain why it matters, and install it correctly rather than just swapping the device at the outlet.
A panel where half the breakers are unlabeled or mislabeled is a real problem when something goes wrong at two in the afternoon or when a tenant calls about a dead circuit. We trace each circuit, confirm what it feeds, and label the panel accurately. It is a straightforward job that pays off every time someone needs to shut off a specific circuit without cutting power to the whole house.
Calling an electrician doesn't have to be stressful, and the pricing conversation is usually simpler than people expect. When you call, we go over the job, ask what we need to know to scope it accurately, and give you a rate on the phone. The price is confirmed before anything is put on the calendar.
What moves a quote is what the job actually involves. The fault has to be found before it can be fixed, and some faults are straightforward while others require opening up a wall or tracing a circuit back to the panel. Whether the existing circuit or panel can carry what is being added affects the scope. If a panel upgrade is needed alongside a new circuit, that gets discussed before the visit so the scope is clear going in.
Electrical service scheduled without the runaround is the goal on every call. You get a clear answer on what the work covers and what it costs, and nothing moves forward until you have both. There is more on the page listing our electrical services.
From older homes to new commercial builds, we run into wiring that was done by someone else, sometimes recently and sometimes decades ago. The approach is the same either way. We assess what is in place, identify what meets current code and what does not, and explain the difference before recommending anything.
Not everything that looks unusual needs to be replaced. Work that was done correctly under an earlier code version may be grandfathered in, and we will say so rather than creating scope that is not necessary. What does have to come out is wiring that creates a genuine safety risk: connections that are not properly enclosed, circuits that were extended without following a consistent standard, or grounding that was skipped entirely. We tell you what falls into which category and why, without making a drama of it.
Local means we care what the neighbors think. The work is done to the standard the next inspection expects, and that does not change based on who did the wiring before we arrived.
Appointments are arranged on the call. We confirm the scope, the price, and the available time before anything is locked in. If the job is at a rental property, we can coordinate with a tenant directly once you have given us the go-ahead, so you do not have to be present to make it happen.
For problems that will not keep, we take short-notice calls when the schedule allows. A dead panel, a burning smell near an outlet, or a circuit that has gone out in a part of the house that cannot stay offline are the kinds of situations we prioritize. Call during our hours, 6:30 AM to 9:00 PM every day, and describe what is happening. We will tell you what the schedule allows and what to expect.
Businesses and commercial properties that have to stay open during the work get the same consideration. We discuss which circuits will be affected and when, so the work can be planned around operating hours rather than against them.
We cover Dunwoody and the communities around it, including Sandy Springs, Doraville, Chamblee, Peachtree Corners, and Brookhaven. If you are in DeKalb County or just across the county line, call and we will confirm whether the address is on the schedule.
Quick response. Code-correct work. Tidy finish.
Every call gets the same process regardless of which community it comes from. You describe the job, we scope it on the phone, and the price is set before anything is scheduled.
Wiring that is buried in a wall, ceiling, or floor and cannot be accessed without significant disruption is sometimes left in place and decommissioned if it is no longer needed. If it needs to be replaced, we assess the most practical route for new wiring and discuss the options before starting. We do not open surfaces beyond what the job requires.
If a cable is damaged during work by another trade, the responsibility for the repair is typically between the property owner and the trade that caused the damage. We can assess and repair the damaged wiring. How the cost is handled between the parties involved is not something we are part of, but we can document what was found if that is useful.
Pool and pond equipment typically requires a dedicated circuit for the pump motor, proper GFCI protection on all outlets and equipment within the required distance of the water, bonding of all metal components in and around the pool, and weatherproof enclosures for any outdoor outlets or controls. The specific requirements depend on the equipment and the installation. We assess what is there and explain what the job involves before starting.
Yes. We coordinate directly with the tenant once you have authorized us to do so, which means you do not need to be on-site to make the visit happen. We confirm which circuits will be affected and for how long before any work begins, so the tenant knows what to expect. The scope and the price are settled with you before anything is scheduled.
Dunwoody has a mix of housing built across several decades, and the most common calls reflect that range. Panel upgrades, GFCI and AFCI retrofits, circuit additions for EV chargers and workshop equipment, and rewiring in homes where the original wiring has been extended or modified over the years are all regular requests. If you are not sure whether what you are seeing needs attention, describe it on the call and we will walk through it with you.
Access arrangements are between the property owner or manager and the tenant. We show up at the confirmed time and, if access is not available, we let you know and reschedule. Coordinating access before the visit is the most reliable way to avoid a wasted trip.
We start by reviewing the scope with you, confirming what the job involves, and identifying where access is needed. If the visit is a diagnostic call, we begin at the most likely source of the problem and work outward from there. Nothing is opened up or modified until we have explained what we intend to do and you have agreed to proceed.
Describe the job and we will tell you what it involves and what it costs. We are available every day from 6:30 AM to 9:00 PM. For problems that cannot wait, call as early in the day as you can and ask what the schedule allows.
Call (470) 749-3242 and get a quote.
Other towns where we take electrical work: Sandy Springs, Peachtree Corners, Brookhaven. Everywhere else we go is in our complete list of towns.
We handle the full range of electrical work for homes and businesses in Dunwoody and DeKalb County, from a single dead outlet to a complete panel upgrade or rewire. Every job starts with a clear scope and a price confirmed before anything is scheduled. The table below covers what each service includes, who it fits best, and what is worth knowing before you call.
| Electrical Service | Scope of Work | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Outlet & Switch Installation | New outlet and switch installation, GFCI and AFCI upgrades, Grounding and bonding corrections, USB and specialty outlet installation | Homeowners adding convenience or correcting code deficiencies | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We upgrade to current standards at the same time as the install. |
| Dedicated Appliance Circuits | Dryer and range circuits, Refrigerator and washer circuits, Workshop and garage circuits, Breaker sized to appliance load | Homeowners adding a major appliance or separating heavy loads from shared circuits | Running a dedicated circuit prevents nuisance tripping and protects both the appliance and the wiring feeding it. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Main panel replacement, Subpanel installation, Load calculation and service-entrance work | Older homes adding modern loads, EV chargers, or major appliances | Panel upgrades in DeKalb County typically require a permit and inspection. We handle the permit side and make sure the work is ready when the inspector arrives. |
Call (470) 749-3242 and we will go over the job, answer your questions, and give you a price before anything is scheduled.
(470) 749-3242